Nitroxide‐mediated radical polymerization of 2‐(dimethylamino)ethyl acrylate and its sequential block copolymerization with styrene and N‐butyl acrylate

Nitroxide‐mediated radical polymerization (NMRP) of 2‐(dimethylamino)ethyl acrylate (DMAEA) was carried out at 100–120 °C, initiated by MONAMS, an alkoxyamine based on N‐tert‐butyl‐N‐(1‐diethyl phosphono‐2,2‐dimethylpropyl)nitroxide, SG1. Controlled polymerization can be achieved by the addition of free SG1 (the initial molar ratio of SG1 to MONAMS ranged from 0.06 to 0.12), giving a linear first‐order kinetic plot up to 55–70% conversion depending on the reaction conditions. The molecular weights show a near linear increase with conversion; however, they deviate to some extent with theoretical values. SG1‐mediated polymerization of DMAEA at 112 °C is also controlled in organic solvents (N,N‐dimethylformide, anisole, xylene). Polymerization rate increases with increasing solvent polarity. Chain transfer to polymer produces ～1 mol % branches in bulk and 1.2–1.9 mol % in organic solvents, typical of those for acrylates. From poly(styrene) (pS) and poly(n‐butyl acrylate) (pBA) macroinitiators, amphiphilic di‐ and triblock copolymers p(S‐b‐DMAEA), p(DMAEA‐b‐S‐b‐DMAEA), p(BA‐b‐DMAEA), and p(DMAEA‐b‐BA‐b‐DMAEA) were synthesized via NMRP at 110 °C. Polymers were characterized by GPC, NMR, surface tension measurements, and DSC. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 414–426, 2006     

Further study of the viscoelastic phase separation of cyanate ester modified with poly(ether imide)

In this study, the viscoelastic phase separation process was studied further by time‐resolved light scattering, differential scanning calorimetry, and scanning electron microscopy in the system of poly(ether imide)‐modified bisphenol‐A dicyanate. It was observed that the evolution time of phase structure and relaxation time of diffusion flow of the bisphenol‐A dicyanate were similar with the phase diagram of curing conversion versus content of PEI. The results suggested that the viscoelastic phase separation was affected by the curing conversion of the system at the onset point of phase separation. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 517–523, 2006     

Semilinear Differential Inclusions in Separable Banach Spaces

Ｓｅｍｉｌｉｎｅａｒ　Ｄｉｆｆｅｒｅｎｔｉａｌ　Ｉｎｃｌｕｓｉｏｎｓ　ｉｎ　Ｓｅｐａｒａｂｌｅ　Ｂａｎａｃｈ　ＳｐａｃｅｓＸｕｅＸｉｎｇｍｅｉ（薛星美）ａｎｄＳｏｎｇＧｕｏｚｈｕ（宋国柱）（ＤｅｐａｒｔｍｅｎｔｏｆＭａｔｈｅｍａｔｉｃｓ，Ｎａｎｊｉｎ...     

新型稀土电子输运材料Tb(AcA)3·phen

Kido等人在文献[1]中报导,在研究有机电致发光(OEL)器件时发现,斓系化合物不能很好地传输载流子.但是,我们在实验中却现Tb(AcA)3phen·不仅是一种很好的OEL发射材料.而且具有很强的电子输运能力.     

磷酸三丁酯从硝酸介质中萃取铀（Ⅵ）的动力学研究

用上升单液滴法和恒界面池法研究了磷酸三丁酯-环己烷从硝酸介质中萃取铀(Ⅵ)的动力学。萃取过程为扩散控制,得到了在扩散控制下影响萃取速率的一些规律。     

还原温度对超细K－Co－Mo催化剂合成低碳醇性能的影响

 用溶胶－凝胶法合成了K－Co－Mo催化剂．样品经不同温度还原后，用于低碳醇的合成．XRD和HRTEM结果表明，样品是超细粒子，粒子尺寸为2～5nm．考察了催化剂的还原温度和反应条件对催化剂性能的影响．实验结果表明，还原温度对催化剂的活性有较大的影响，最佳还原温度为500℃．最佳反应温度范围为310～330℃．升高压力和空速可以提高醇的收率和选择性．在空速14400h－1，压力6．0MPa和温度310℃的条件下，醇的选择性为55．8％，收率为520．0g／（kg·h），MeOH／C2＋OH为0．27．催化剂稳定性良好，在200h的寿命实验中，活性基本不变．与文献中催化剂相比，超细K－Co－Mo催化剂对合成醇具有较高的活性和选择性，尤其是对C2＋OH的合成明显高于其他合成醇催化剂体系．     

Rhodium(I)‐Catalyzed [4 + 2] Cycloaddition Reactions of 2‐Alkylenecyclo‐butanols with Alkynes and (E)‐2‐Nitroethenylbenzene through C(sp2)—C(sp3) Bond Cleavage

An intermolecular [4 + 2] cycloaddition was realized through C—C bond cleavage in the presence of Rh(I) catalyst. The selective ring opening of 2‐alkylenecyclobutanols enables the generation of active alkenylrhodium species, which underwent smooth cross addition over alkynes and (E)‐2‐nitroethenylbenzene, leading to highly substituted all‐carbon six‐membered rings in a single step and in a complete atom economy.     

苯基重氮盐-冠醚分子嵌合物的FAB-MS及其准分子离子生成机理的研究

Fast atom bombardment mass spectra of a series of arenediazonium salts with various substituents complexed with 18-crown-6 and dibenzo-24-crown-8 ethers were examined. The correlation between quasi-molecular ion abundance of various complexes and the properties, coordination ability of donor-acceptor linkages in the complexes were studied. By using molecular orbital calculation we have successfully demonstrated that the correlation cited is related to the electron cloud densities on the heteroatoms α-N and β-N of arenediazonium salts.     

掺铒a-SixC1-x-H薄膜的发光特性

用等离子体增强化学气相沉积（PECVD）的方法，以固定的氢气（H2）流量和不同的硅烷（SiH4）和甲烷（CH4）流量比沉积了一系列的氢化非晶SiC（a-Si，C1-x-H）膜。用这种宽带隙的a-SixC1-x-H材料作为掺铒的基体材料，通过离子注入的方法得到掺铒的a-SixC1-x-H（a-SixC1-x-H：Er）膜。注入以后的样品经过不同温度的退火。用X射线光电子能谱（XPS）、红外吸收光谱（IR）、拉曼散射谱（Raman）等技术研究不同的SiH4／CH4流量比和退火温度对a-SixC1-x-H：Er发光强度的影响。结果表明，高温退火引起了膜中C的分凝，对饵的发光是不利的。通过低温和室温下铒发光强度的比较，表明这种材料具有较弱的温度猝灭效应。     

钇对Ti-1100高温钛合金热稳定性和蠕变行为的影响

量了Ｔｉ１１００和Ｔｉ１１００／０１％Ｙ（质量分数）高温钛合金在６００℃／１００ｈ空气中暴露后的拉伸性能及在６００℃／１５０ＭＰａ／１００ｈ条件下的蠕变性能，利用透射电镜观察了合金室温及蠕变后的组织。结果表明，Ｔｉ１１００合金加入０１％的Ｙ后，由于原始β晶粒得到细化，明显改善了其热稳定性；固溶在基体中的硅原子阻碍位错滑移和攀移，使蠕变中的回复过程难于实现；稀土还抑制α２相的长大，所形成的氧化物也阻碍位错的运动。这些均有利于提高Ｔｉ１１００合金的抗蠕变性能。